Sending Scanned Data as E-Mail from Computer

Before attaching scanned data to an e-mail, check the following:

• MP Drivers are installed. (Windows)

  If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from the Canon website.

• The printer and computer are connected by network correctly.

  When you scan the data over the network connection, check the following.

  • For Windows:

    • Network Scan Settings

  • For macOS:

    • Scan-from-Operation-Panel Settings Screen

• The transfer destination on the computer and the file name are specified.

  Specify the transfer destination on the computer and the file name with Canon IJ Scan Utility (Windows)/Canon IJ Scan Utility Lite (macOS).

  • For Windows:

    • Settings Dialog Box

  • For macOS:

    • Settings Dialog

Follow the procedure below to send the scanned data as an e-mail from the computer.

1. Check that printer is turned on.

2. Load original on platen.

3. Select Scan on the HOME screen.

   • Using Touch Screen

   The screen for selecting to which you save/forward the data is displayed.

   

4. Select Attach to email.

5. Select E-mail from PC.

6. Select a computer to forward scanned data.

   Select Local (USB) for a USB-connected computer, or select the computer to forward the scanned data for a network-connected computer.

   

   The Scan standby screen is displayed.

7. Specify settings as necessary.

   

   • A: Select the document type.

     Document

     Select to scan the document.

     Photo

     Select to scan the photo.

   • B: Displays Scan settings screen.

     For more on the setting items:

     • Setting Items for Scanning Using Operation Panel

   • C: Displays the screen to select the save/forward.

   • D: Select to register the current scan settings as a custom setting.

     • Registering Favorite Settings (My Presets)

8. Press the Black button or the Color button.

   Note

   • If the original is not loaded properly, a message is displayed on the touch screen. Load the original on the platen according to the scan settings.

   • When you select JPEG for Format on the scan setting screen:

     The printer starts scanning and scanned data is forwarded to the computer.

   • When you select PDF or Compact PDF for Format on the scan setting screen:

     The confirmation screen asking you if you continue scanning is displayed after scanning is complete.

     

     If you continue scanning, load the original on the platen and start scanning.

     If you do not continue scanning, select End. The scanned data is forwarded to the computer in one PDF file.

   Scanned data is forwarded to the computer and attached to an e-mail according to the settings specified in Canon IJ Scan Utility/Canon IJ Scan Utility Lite.

   For the settings or how to send an e-mail, refer to the mail software's instruction manual.

   Remove the original on the platen after scanning is complete.

Note

• When using Windows, the program selection screen may be displayed after pressing Black button or Color button.

  In this case, select Canon IJ Scan Utility and click OK.